top of page
RUHENS WHP2200
RUHENS WHP2200 is a unique water dispenser that provides 10L of cold filtered water and 3L of hot filtered water. RUHENS WHPis ideal for use in public areas with high demands!
 
It is an ideal solution for crystal clear, healthy filtered water at 2 different temperatures, hot & cold, depending on your needs.
 
4 Stages Filtration System
The filtration system can be placed either inside the appliance or under the kitchen counter and connected also to the existing tap.
Stage 1: Sediment filter to stop sediments, dirt, rust and particles up to 5 micron, by Omnipure USA.
Stage 2 & 3: Carbon filter with polyphosphate crystals to remove chlorine, taste, odors and scale inhibitor, by Omnipure USA.
Stage 4: Ultra filtration membrane to remove pathogens like bacteria & viruses up to 0.1 micron, by Wonbong.

Optional Alternative Filter System: According to each customer's needs a different filtration system can be installed i.e carbon filter, carbon filter with UV, Reverse Osmosis System etc. Please contact us for further assistance.

For more information contact us on 80 000 880 (toll-free) or email us at sales@karmawatercy.com

RUHENS WHP2200

€705.00 Regular Price
€650.00Sale Price

  • Energy Consumption:

    - Cold: 120W (1.5Α)

    - Hot: 600W

    • Dimensions: 38(W) x 43 (D) x 12.5(H) cm
    • Storage Tank: Stainless steal)
    • Capacity: Cold, about 10 Liters | Hot, about 3 Liters
    • Temperatures:

    - Cold: about4-6°C 

    - Hot: about 80-85°C 

     

    FILTRATION SYSTEM

    • Sediment filter with 5 micron porosity - retains solids such as sand, mud, rust
    • Carbon filter with 5 micron porosity with polyphosphoric crystals - retains chemicals such as chlorine, taste, odors while simultaneously breaking down hardness (does not remove minerals).
    • Ultra filtration filter with a porosity of 0.1-0.01 micron which retains pathogens.

    The filter system can be placed under the kitchen counter and connected to the drinking water tap.

    • Filter Dimensions: 10'' x 2''Ø
    • Inlet Water Pressure: Minimum 1.4 Bar - Maximum 6.9 Bar
    • Filter Certifications: NSF & WQA

    Change Filters

    • Sediment: 12 months approx
    • Carbon/Polyphosphate: up to 12 months or 5,000 liters @ 3.8 liters/minute
    • UF membrane: up to 12 months or 10,000 liters

    Note:

    • Filters must not be used in water of microbiologically unsuitable or dubious quality.
    • The elements that the filters remove may not be present in the water.
bottom of page